|
Instructions:
|
| 1 |
Before
starting, the lower straps (1) should be slackened off. The header pole
(5) should be inserted if it has not been left in the flysheet and the hiking poles set to 1350 length
|
| 2 |
Insert
the 2 alloy tent poles into the pole sleeves (2) at the lower edge and
feed them through the sleeves and pole clips (3) and into the top pole
pockets (4)
|
| 3 |
Insert the lower ends of the poles into the eyelets in the lower straps (1) and tighten the straps
|
| 4 |
Tie
or wrap the hiking pole straps to the header pole (5) until tight and
fit the tips of the hiking poles into the strap eyelets (6)
|
| 5 |
Stake out the guylines as required
|
|
*
It is recommended that the hiking poles are staked out, either by using
the guylines on the rear panel of the tent or the straps at the pole
tips
|
